Best Place to Put a Thermostat in a House

The do'southward and don'ts for effective thermostat readings

Getting an accurate temperature reading is critical to keeping your home at the comfort level you desire. The placement of the thermostat determines how accurate that reading is.

Your dwelling's thermostat is the headquarters for maintaining comfortable room temperatures. The thermostat records the temperature of your home, particularly the room in which it is placed, and uses that information to decide whether the heating and cooling organisation needs to kick on.

Follow these rules provided past Rosie on the Business firm Certified Partner, Green ID, and avoid inaccurate temperature readings.

Ideal Thermostat Placement

In a nutshell, the best placement for the thermostat is on a primal interior wall, away from direct sunlight, air vents, the kitchen, hallways, windows, and doors.

Install the thermostat 52 to threescore inches above the flooring for a couple of reasons.

1. Heat rises. Then lower than 52 inches may read likewise low, while higher up 60 inches could read too loftier.
2. This tiptop prevents accidental bumps to the thermostat, which can cause unwanted setting changes.

Play Past The Rules To Achieve Maximum Condolement

Rule #1 | Don't identify in a beam of sunlight.

Thermostats placed in direct sunlight often provide fake readings. When heated by direct sunlight, it will sense the room is warmer than reality, causing the air conditioner or heater to kick on when information technology is not needed. Called "ghost readings," this inaccuracy wastes a lot of energy by cycling on and off unnecessarily, thus costing you more coin.

Dominion #two | Don't place on the inside of an exterior wall.

The but thermometer that is placed on an exterior wall is one that is meant to measure out the outside air temperature. The problem with placement on an inside wall with the opposite side outdoors is at that place are a lot of piffling holes that create drafts. Those drafts measure the temperature on exterior of house, not inside where information technology matters. Mount the thermostat on a central interior wall.

Dominion #3 | Don't identify under or in the menses of a supply register.

The whole signal of a thermostat is to accurately nowadays the indoor temperature. When a thermostat is above or near an air vent, the temperature readings are skewed. Hit with incoming air when the heater is on, the thermostat senses the room is warmer than information technology is. If the air conditioner is running, the thermostat cools down before your abode does. In both cases it is responding to inaccurate information.

Rule #iv | Practice not place in or near the kitchen.

Rut is generated from cooking in this concentrated surface area. A thermostat placed in the kitchen often reads that the abode is far warmer than information technology truly is, causing the air conditioner to turn on when you don't need information technology. Because the stove or oven isn't ever in utilize and heating the area, it tin confuse the thermostat and prevent it from getting an accurate reading.

Rule #5 | Do non identify near windows and doors.

Doors and windows could be drafty. If the thermostat is nearby, information technology will sense the room being cooler than information technology actually is. With doors constantly opening and closing, a thermostat placed near a door is exposed to more than outside air than the remainder of the house, thus providing inaccurate readings and causing the system to cycle on and off without achieving your desired temperature.

Rule #half dozen | Do make sure the thermostat location is strategically determined.

Information technology should non be tucked away in an isolated location such as a hallway. Place information technology equally close to the living areas you lot are trying to command your comfort level in.

Other Considerations

Multi-Level Homes

Because warm air rises and cool air sinks, the top floor will be warmer than the bottom floor. Therefore, it is all-time to install the thermostat on a kickoff-floor wall. That placement will more accurately find the boilerplate temperature.

Remote Sensors

Thermostats with a remote sensor option can accommodate if the thermostat is in the wrong spot. Merely this option can be complicated. Discuss this pick with an experienced contractor.

If the HVAC contractor yous are getting an guess from fails to consider the location of the new thermostat, call another contractor.

###

Podcast

David Byrne of Dark-green ID (Green Integrated Design) discusses the one part of your air conditioning system y'all probable never call back near: the placement of your thermostat! Its disquisitional for authentic temperature readings for the condolement yous desire. He gives the rules of where and where not to identify information technology, the proper peak from the flooring and a bones agreement of the returns, supply registers and compressor functions.

SPONSORED By: GREEN ID

By diagnosing air conditioning problems and abode energy inefficiencies, Light-green ID helps homeowners create a more than healthy, efficient, and comfy living space. Because we are a small local business in the Valley, we offer personalized attention to every home we visit and we guarantee more attention to detail than what you lot would receive from a large corporation.

Photo Credits

• Shutterstock

Related Content

• DIY FAQ: Energy Saving Ideas for Every Homeowner!
• DIY FAQ: Blowing Off Your AC's Compressor Maintenance Volition Cost More In the Long Run
• DIY FAQ: Maintaining Your Heating And Cooling Organisation
• DIY FAQ: Consumer Guide For Buying A Dwelling A/C System
• DIY FAQ: What Are The Tell Tale Signs My Air-conditioning Unit Is Giving Out?

---

Print this page

sandstromcovir1963.blogspot.com

Source: https://www.rosieonthehouse.com/blog/proper-thermostat-placement-is-key-to-accurate-readings